How Much Does Wrought Iron Railing Installation Cost?


Wrought Iron Railing Reviews, Installation and Cost
After you’ve finished building your new staircase, you could notice that it’s lacking something. A staircase without a railing can appear dangerous to use, especially if you have children or elderly individuals in your home. You can use this opportunity to produce something unique by using wrought iron for the staircase railing.
Wrought iron is known for its durability, and you want that quality reflected in your stair railing. Furthermore, if you’re striving for a more traditional look, wrought iron’s distinct appearance might be a significant benefit. So, if you want to make a wrought iron stair railing, how much should you anticipate to pay?
Your new stair railing will cost $85 per linear foot of wrought iron. The bottom rails, handrails, balusters, and newel posts of the railing will all be made of wrought iron. The total cost of these elements will be $2,000 in total. If you want the wrought iron railing professionally installed, you’ll have to spend an extra $650.
Combine your newly completed staircase with a new wrought iron railing to make your home safer and more stylish. Continue reading to find out how much your new wrought iron railing will cost.

Wrought Iron Price Per Linear Foot


  1. $60 is the low-end estimate.
  2. $85 is a mid-range estimate.
  3. $120 is the high-end estimate.

The material you select will have a significant impact on the total cost of your new stair railing. We’re going with wrought iron in this scenario. For this project, you’ll have to pay $85 every linear foot of wrought iron required.
Wrought iron isn’t the only material you can choose for your stair railing, but it might be the perfect fit for your tastes. As previously stated, the aesthetic of wrought iron has a historic feel to it. When wrought iron is shaped in particular ways, it takes on a sophisticated aesthetic that is quite appealing.
Wrought iron may be used both indoors and outdoors without causing too much instability. For years to come, the wrought iron railing will stand firm. Wrought iron also outperforms other materials when it comes to resisting wear and tear.
It’s worth noting that using wrought iron for your stair railing has some drawbacks. For starters, wrought iron can rust, so utilizing it outside is risky. If you want to keep your wrought iron looking good, you should seal it on a regular basis.
If you don’t mind the drawbacks, go ahead and utilize wrought iron for your stair railing. You can begin planning for the major components of your wrought iron stair railing.

Wrought Iron Stair Railing Elements Cost


Cost of Stair Railing Elements

  1. Balusters $900
  2. $500 for the bottom rails and $450 for the handrails
  3. $150 for newel posts

To finish the wrought iron stair railing, you’ll need four key components. The bottom rails, handrails, balusters, and newel posts are among these features. All of the aspects of your new wrought iron stair railing should cost around $2,000 total.
Let’s have a look at the cost for those wrought iron stair railing components in more detail. We can also discuss how those pieces work together to complete this particular fixture while we’re at it.


First, there are the balusters, which are stair railing components. If you’re not familiar with the term, it’s also known as a banister or a spindle. Those stair railing components cost $900, regardless of what you label them.
The balusters are significant because they protect the side of your staircase that is open. They have the ability to prevent people from tumbling down the stairwell.
The balusters are also required since they aid in the support of the handrails. The balusters reinforce the handrails, making it easier for individuals to hold on to them as they go up and down the stairwell.

Rails at the bottom

Let’s talk about the bottom rails next. A set of bottom rails for a wrought iron stair railing costs around $500.
The bottom rails support the remainder of the railing. The balusters are usually inserted into the bottom rails, which strengthens the structure.
Bottom rails, on the other hand, are not always required. You can eliminate the bottom rails entirely if you opt to build the balusters into the staircase. One approach to save money on this endeavor is to do so.
Despite this, many homeowners opt to install bottom rails. The bottom rails are preferred because they properly frame the railing. If you utilized bottom rails, you can also remove the stair railing without causing too much damage to the steps.


Stair railings frequently have handrails as well. Homeowners who install wrought iron handrails will be charged $450.
The railings are often positioned on the open side of the staircase. Handrails are installed for safety reasons, but they can also provide a new design element.
The railings can be installed in one of two ways. If there are any adjacent walls, they can be attached directly to them. Alternatively, two posts can be used to link the handrails.
The balusters are also utilized to reinforce the handrails, as we indicated earlier. The handrails will not become shaky as a result of its installation.

Posts for the newel

The newel posts are required to finish your wrought iron stair railing. Each newel post is $75, but you’ll need two, so the total will be $150.
The newel posts are responsible for bolstering the stair railings. The bottom rails and handrails are frequently fastened directly to the newel posts. As a result of the way those pieces are joined, they all grow stronger.
The typical cost of a wrought iron newel post is $75, although more complex designs may set you back more. Wrought iron newel posts with complex designs can cost well over $500.
Wrought Iron Stair Railing Installation Cost

  1. $350 is the low-end estimate.
  2. $650 is a mid-range estimate.
  3. $1,000 is a high-end estimate.

Getting the components for the wrought iron stair railing is only half of the battle. Now you must assemble the pieces and install the stair railing. You may hire specialists to do that job for you for $650.
Installing a wrought iron stair railing is not a project you want to do on by yourself. It’s a difficult task, and if you haven’t done it before, something will almost certainly go wrong.
For example, the pieces to be installed may need to be tweaked slightly to fit your staircase adequately. Working with the wrought iron to modify it somewhat is what this entails. The item could be ruined if something goes wrong during the altering procedure.
Professional installers may also make certain that the stair railing is correctly secured. Given what the stair railing is designed to perform, the significance of this cannot be emphasized.

Factors Affecting the Cost of Installing a Wrought Iron Stair Railing

You should have a fair notion of how much your new wrought iron stair railing is going to cost by now. You should still refrain from completing your expenses at this time because there are still more costs to consider.
These costs can have a major impact on the total cost of this installation. You can see the cost components in the table below.

The Staircase’s Accessibility

On your property, where is the stairwell? Is it in a large open space or confined to a tiny space, such as a basement?
These are crucial questions to ask because the answers will have an impact on the project’s final expense. If you ask an installer to work in a small space, they will charge you more.

Ramps for the Disabled

You may need to add an accessibility ramp to the new staircase in addition to the handrail. The disability ramp may be required to comfortably accommodate some members of your family or friends. If you’re constructing a new stairway for your store, an accessibility ramp may be necessary.
A new handicap ramp will set you back $1,500. Two handrails should be installed on each sides of the ramp to make it easier to use.


Check with your local building department to see whether a building permit is required before constructing the new railing. In some cases, this is true.
Fortunately, construction permits for this type of project are inexpensive. They’re only $60 each.

Frequently Asked Questions


Can I use Wrought Iron Spindles instead of Wood Spindles?

It is possible to replace wood spindles or balusters with wrought iron. It’s even considered a typical home repair endeavor. You can also repair the wood balusters without replacing the bottom rails or handrails.

What Is the Best Way to Cut Wrought Iron Spindles?

Cutting the wrought iron balusters to fit underneath the handrails may be necessary. Trim the wrought iron balusters with a chop saw equipped with metal cutting blades.

What Is the Best Way to Clean Wrought Iron Railings?

It’s simple to clean your wrought iron railing. To begin, use a vacuum with a brush attachment to clean debris from the railing’s surface.
After that, in a small basin, combine dish soap and water. Using a separate brush, dip it into the soapy solution. The soapy mixture can then be used to clean the wrought iron.
Finally, the wrought iron railing must be rinsed. After saturating the railing with water, wipe it down with a clean towel. After that, all you have to do is wait for the wrought iron railing to dry.
This article is accurate and true to the best of SmartLiving’s knowledge. Content is for informational or entertainment purposes only and does not substitute for personal counsel or professional advice in business, financial, legal, or technical matters.

Categories: Stair Services

Call For Estimate